dmesg - Intel Pentium G6950
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-37-generic (buildd@kapok) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #64-Ubuntu SMP Mon Sep 22 21:28:38 UTC 2014 (Ubuntu 3.13.0-37.64-generic 3.13.11.7)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009f7ff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e8000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000db7ac43f] usable
BIOS-e820: [mem 0x00000000db7ac440-0x00000000db7ae49f] ACPI NVS
BIOS-e820: [mem 0x00000000db7ae4a0-0x00000000dfffffff] reserved
BIOS-e820: [mem 0x00000000f4000000-0x00000000f7ffffff] reserved
BIOS-e820: [mem 0x00000000fe000000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000fed45000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x00000001fbffffff] usable
BIOS-e820: [mem 0x00000001fc000000-0x00000001ffffffff] reserved
BIOS-e820: [mem 0x0000000200000000-0x000000021bffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.6 present.
DMI: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.05 06/09/2010
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21c000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E3FFF write-protect
E4000-EFFFF write-back
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask C00000000 write-back
1 base 0DB800000 mask FFF800000 uncachable
2 base 0DC000000 mask FFC000000 uncachable
3 base 0E0000000 mask FE0000000 uncachable
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 16GB, type WB
reg 1, base: 3512MB, range: 8MB, type UC
reg 2, base: 3520MB, range: 64MB, type UC
reg 3, base: 3584MB, range: 512MB, type UC
total RAM covered: 15800M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 1G num_reg: 6 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 4GB, type WB
reg 1, base: 3512MB, range: 8MB, type UC
reg 2, base: 3520MB, range: 64MB, type UC
reg 3, base: 3584MB, range: 512MB, type UC
reg 4, base: 4GB, range: 4GB, type WB
reg 5, base: 8GB, range: 8GB, type WB
e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdb7ac max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f9bf0-0x000f9bff] mapped at [ffff8800000f9bf0]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x01fe1000, 0x01fe1fff] PGTABLE
BRK [0x01fe2000, 0x01fe2fff] PGTABLE
BRK [0x01fe3000, 0x01fe3fff] PGTABLE
init_memory_mapping: [mem 0x21be00000-0x21bffffff]
[mem 0x21be00000-0x21bffffff] page 2M
BRK [0x01fe4000, 0x01fe4fff] PGTABLE
init_memory_mapping: [mem 0x218000000-0x21bdfffff]
[mem 0x218000000-0x21bdfffff] page 2M
init_memory_mapping: [mem 0x200000000-0x217ffffff]
[mem 0x200000000-0x217ffffff] page 2M
init_memory_mapping: [mem 0x00100000-0xdb7abfff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0xdb5fffff] page 2M
[mem 0xdb600000-0xdb7abfff] page 4k
init_memory_mapping: [mem 0x100000000-0x1fbffffff]
[mem 0x100000000-0x1fbffffff] page 2M
BRK [0x01fe5000, 0x01fe5fff] PGTABLE
BRK [0x01fe6000, 0x01fe6fff] PGTABLE
RAMDISK: [mem 0x35b5a000-0x36da4fff]
ACPI: RSDP 00000000000e5210 000014 (v00 COMPAQ)
ACPI: RSDT 00000000db7d0540 000040 (v01 HPQOEM SLIC-BPC 20100609 00000000)
ACPI: FACP 00000000db7d05e8 000074 (v01 COMPAQ IBEXPEAK 00000001 00000000)
ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has zero address or length: 0x0000000000000050/0x0 (20131115/tbfadt-603)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 0, using default 8 (20131115/tbfadt-653)
ACPI: DSDT 00000000db7d0a4f 00A8FE (v01 COMPAQ DSDT_PRJ 00000001 MSFT 0100000E)
ACPI: FACS 00000000db7d0500 000040
ACPI: APIC 00000000db7d065c 0000BC (v01 COMPAQ IBEXPEAK 00000001 00000000)
ACPI: ASF! 00000000db7d0718 000063 (v32 COMPAQ IBEXPEAK 00000001 00000000)
ACPI: MCFG 00000000db7d077b 00003C (v01 COMPAQ IBEXPEAK 00000001 00000000)
ACPI: TCPA 00000000db7d07b7 000032 (v01 COMPAQ IBEXPEAK 00000001 00000000)
ACPI: SLIC 00000000db7d07e9 000176 (v01 HPQOEM SLIC-BPC 00000001 00000000)
ACPI: HPET 00000000db7d095f 000038 (v01 COMPAQ IBEXPEAK 00000001 00000000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021bffffff]
Initmem setup node 0 [mem 0x00000000-0x21bffffff]
NODE_DATA [mem 0x21bff5000-0x21bff9fff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880213600000-ffff88021b5fffff] on node 0
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21bffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009efff]
node 0: [mem 0x00100000-0xdb7abfff]
node 0: [mem 0x100000000-0x1fbffffff]
node 0: [mem 0x200000000-0x21bffffff]
On node 0 totalpages: 2045770
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3998 pages, LIFO batch:0
DMA32 zone: 13983 pages used for memmap
DMA32 zone: 894892 pages, LIFO batch:31
Normal zone: 18176 pages used for memmap
Normal zone: 1146880 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0xf808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 8 CPUs, 6 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000e7fff]
PM: Registered nosave memory: [mem 0x000e8000-0x000fffff]
PM: Registered nosave memory: [mem 0xdb7ac000-0xdb7acfff]
PM: Registered nosave memory: [mem 0xdb7ad000-0xdb7adfff]
PM: Registered nosave memory: [mem 0xdb7ae000-0xdb7aefff]
PM: Registered nosave memory: [mem 0xdb7af000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xf3ffffff]
PM: Registered nosave memory: [mem 0xf4000000-0xf7ffffff]
PM: Registered nosave memory: [mem 0xf8000000-0xfdffffff]
PM: Registered nosave memory: [mem 0xfe000000-0xfed3ffff]
PM: Registered nosave memory: [mem 0xfed40000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xffffffff]
PM: Registered nosave memory: [mem 0x1fc000000-0x1ffffffff]
e820: [mem 0xe0000000-0xf3ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 29 pages/cpu @ffff88021bc00000 s86400 r8192 d24192 u262144
pcpu-alloc: s86400 r8192 d24192 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2013526
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Checking aperture...
No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7949636K/8183080K available (7375K kernel code, 1144K rwdata, 3404K rodata, 1336K init, 1444K bss, 233444K reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
Offload RCU callbacks from all CPUs
Offload RCU callbacks from CPUs: 0-7.
NR_IRQS:16640 nr_irqs:744 16
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2793.220 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5586.44 BogoMIPS (lpj=11172880)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 32K (ffffffff81e6e000 - ffffffff81e76000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 28541 entries in 112 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Pentium(R) CPU G6950 @ 2.80GHz (fam: 06, model: 25, stepping: 05)
Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
perf_event_intel: CPUID marked event: 'bus cycles' unavailable
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (11172.88 BogoMIPS)
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0xdb7ac440-0xdb7ae49f] (8288 bytes)
reboot: HP Compaq Laptop series board detected. Selecting BIOS-method for reboots.
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 6:55:06, date: 10/28/14
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf4000000-0xf7ffffff] (base 0xf4000000)
PCI: MMCONFIG at [mem 0xf4000000-0xf7ffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: SSDT 00000000db7dc771 0003BA (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003BA (v01 COMPAQ CPU_TM2 00000001 MSFT 0100000E)
ACPI: SSDT 00000000db7dc399 0003D8 (v01 COMPAQ CST 00000001 MSFT 0100000E)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0003D8 (v01 COMPAQ CST 00000001 MSFT 0100000E)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
acpi LNXCPU:00: Invalid PBLK length [7]
acpi LNXCPU:01: Invalid PBLK length [7]
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
ACPI BIOS Error (bug): \_SB_.PCI0._OSC: Excess arguments - ASL declared 5, ACPI requires 4 (20131115/nsarguments-189)
ACPI Error: [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS (20131115/dsfield-211)
ACPI Error: Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8802100cc668), AE_ALREADY_EXISTS (20131115/psparse-536)
ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
acpi PNP0A08:00: _OSC failed (AE_ALREADY_EXISTS); disabling ASPM
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [mem 0xf8000000-0xfdffffff]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x1000-0x2fff]
pci_bus 0000:00: root bus resource [io 0x3000-0x6fff]
pci_bus 0000:00: root bus resource [io 0x7000-0xafff]
pci_bus 0000:00: root bus resource [io 0xb000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xf3ffffff]
pci_bus 0000:00: root bus resource [mem 0xfed40000-0xfed44fff]
pci 0000:00:00.0: [8086:0040] type 00 class 0x060000
DMAR: Disabling batched IOTLB flush on Ironlake
pci 0000:00:02.0: [8086:0042] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf03fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x1190-0x1197]
pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xf0426900-0xf042690f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.3: [8086:3b67] type 00 class 0x070002
pci 0000:00:16.3: reg 0x10: [io 0x11a8-0x11af]
pci 0000:00:16.3: reg 0x14: [mem 0xf0424000-0xf0424fff]
pci 0000:00:19.0: [8086:10ef] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xf0400000-0xf041ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xf0425000-0xf0425fff]
pci 0000:00:19.0: reg 0x18: [io 0x1100-0x111f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf0426000-0xf04263ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xf0420000-0xf0423fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:3b4e] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf0426400-0xf04267ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1e.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:3b0a] type 00 class 0x060100
pci 0000:00:1f.2: [8086:3b20] type 00 class 0x01018a
pci 0000:00:1f.2: reg 0x10: [io 0x11b0-0x11b7]
pci 0000:00:1f.2: reg 0x14: [io 0x11d8-0x11db]
pci 0000:00:1f.2: reg 0x18: [io 0x11b8-0x11bf]
pci 0000:00:1f.2: reg 0x1c: [io 0x11dc-0x11df]
pci 0000:00:1f.2: reg 0x20: [io 0x1150-0x115f]
pci 0000:00:1f.2: reg 0x24: [io 0x1160-0x116f]
pci 0000:00:1f.5: [8086:3b26] type 00 class 0x010185
pci 0000:00:1f.5: reg 0x10: [io 0x11c0-0x11c7]
pci 0000:00:1f.5: reg 0x14: [io 0x11e0-0x11e3]
pci 0000:00:1f.5: reg 0x18: [io 0x11c8-0x11cf]
pci 0000:00:1f.5: reg 0x1c: [io 0x11e4-0x11e7]
pci 0000:00:1f.5: reg 0x20: [io 0x1170-0x117f]
pci 0000:00:1f.5: reg 0x24: [io 0x1180-0x118f]
pci 0000:00:1c.0: PCI bridge to [bus 18]
pci 0000:00:1c.4: PCI bridge to [bus 24]
pci 0000:00:1c.6: PCI bridge to [bus 30]
pci 0000:00:1e.0: PCI bridge to [bus 0d] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf8000000-0xfdffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x2fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x3000-0x6fff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x7000-0xafff] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xb000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xf3ffffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *10 11 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
ACPI: Enabled 1 GPEs in block 00 to 3F
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0xfffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci 0000:3f:00.0: [8086:2c61] type 00 class 0x060000
pci 0000:3f:00.1: [8086:2d01] type 00 class 0x060000
pci 0000:3f:02.0: [8086:2d10] type 00 class 0x060000
pci 0000:3f:02.1: [8086:2d11] type 00 class 0x060000
pci 0000:3f:02.2: [8086:2d12] type 00 class 0x060000
pci 0000:3f:02.3: [8086:2d13] type 00 class 0x060000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009f800-0x0009ffff]
e820: reserve RAM buffer [mem 0xdb7ac440-0xdbffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0f13 PNP0f0e (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 PNP0500 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:08: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0b: [io 0x04d0-0x04d1] has been reserved
system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0c: [io 0x0400-0x041f] has been reserved
system 00:0c: [io 0x0420-0x043f] has been reserved
system 00:0c: [io 0x0440-0x045f] has been reserved
system 00:0c: [io 0x0460-0x047f] has been reserved
system 00:0c: [io 0x0480-0x048f] has been reserved
system 00:0c: [io 0xf800-0xf81f] has been reserved
system 00:0c: [io 0xf820-0xf83f] has been reserved
system 00:0c: [io 0xf840-0xf85f] has been reserved
system 00:0c: [io 0xf860-0xf87f] has been reserved
system 00:0c: [io 0xfa00-0xfa3f] has been reserved
system 00:0c: [io 0xfc00-0xfc7f] has been reserved
system 00:0c: [io 0xfc80-0xfcff] has been reserved
system 00:0c: [io 0xfe00-0xfe7f] has been reserved
system 00:0c: [io 0xfe80-0xfeff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0d: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0d: [mem 0x00100000-0xdfffffff] could not be reserved
system 00:0d: [mem 0x000e4000-0x000fffff] could not be reserved
system 00:0d: [mem 0xfec01000-0xfecfffff] has been reserved
system 00:0d: [mem 0xfed00400-0xfed3ffff] has been reserved
system 00:0d: [mem 0xfed45000-0xffffffff] has been reserved
system 00:0d: [mem 0xf4000000-0xf7ffffff] has been reserved
system 00:0d: [mem 0x000cec00-0x000e3fff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: bus type PNP unregistered
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 18] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 18] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 18] add_size 200000
pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 24] add_size 1000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 24] add_size 200000
pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff] to [bus 24] add_size 200000
pci 0000:00:1c.6: bridge window [io 0x1000-0x0fff] to [bus 30] add_size 1000
pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 30] add_size 200000
pci 0000:00:1c.6: bridge window [mem 0x00100000-0x000fffff] to [bus 30] add_size 200000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.4: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.6: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.6: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.4: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.6: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xf8000000-0xf81fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xf8200000-0xf83fffff 64bit pref]
pci 0000:00:1c.4: BAR 14: assigned [mem 0xf8400000-0xf85fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0xf8600000-0xf87fffff 64bit pref]
pci 0000:00:1c.6: BAR 14: assigned [mem 0xf8800000-0xf89fffff]
pci 0000:00:1c.6: BAR 15: assigned [mem 0xf8a00000-0xf8bfffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
pci 0000:00:1c.4: BAR 13: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.6: BAR 13: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.0: PCI bridge to [bus 18]
pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.0: bridge window [mem 0xf8000000-0xf81fffff]
pci 0000:00:1c.0: bridge window [mem 0xf8200000-0xf83fffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 24]
pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.4: bridge window [mem 0xf8400000-0xf85fffff]
pci 0000:00:1c.4: bridge window [mem 0xf8600000-0xf87fffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 30]
pci 0000:00:1c.6: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.6: bridge window [mem 0xf8800000-0xf89fffff]
pci 0000:00:1c.6: bridge window [mem 0xf8a00000-0xf8bfffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d]
pci_bus 0000:00: resource 4 [mem 0xf8000000-0xfdffffff]
pci_bus 0000:00: resource 5 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 6 [io 0x1000-0x2fff]
pci_bus 0000:00: resource 7 [io 0x3000-0x6fff]
pci_bus 0000:00: resource 8 [io 0x7000-0xafff]
pci_bus 0000:00: resource 9 [io 0xb000-0xffff]
pci_bus 0000:00: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 11 [mem 0xe0000000-0xf3ffffff]
pci_bus 0000:00: resource 12 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:18: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:18: resource 1 [mem 0xf8000000-0xf81fffff]
pci_bus 0000:18: resource 2 [mem 0xf8200000-0xf83fffff 64bit pref]
pci_bus 0000:24: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:24: resource 1 [mem 0xf8400000-0xf85fffff]
pci_bus 0000:24: resource 2 [mem 0xf8600000-0xf87fffff 64bit pref]
pci_bus 0000:30: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:30: resource 1 [mem 0xf8800000-0xf89fffff]
pci_bus 0000:30: resource 2 [mem 0xf8a00000-0xf8bfffff 64bit pref]
pci_bus 0000:0d: resource 4 [mem 0xf8000000-0xfdffffff]
pci_bus 0000:0d: resource 5 [io 0x0000-0x0cf7]
pci_bus 0000:0d: resource 6 [io 0x1000-0x2fff]
pci_bus 0000:0d: resource 7 [io 0x3000-0x6fff]
pci_bus 0000:0d: resource 8 [io 0x7000-0xafff]
pci_bus 0000:0d: resource 9 [io 0xb000-0xffff]
pci_bus 0000:0d: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 11 [mem 0xe0000000-0xf3ffffff]
pci_bus 0000:0d: resource 12 [mem 0xfed40000-0xfed44fff]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 18732K (ffff880035b5a000 - ffff880036da5000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd77ac000-0xdb7ac000] (64MB) mapped at [ffff8800d77ac000-ffff8800db7abfff]
microcode: CPU0 sig=0x20655, pf=0x2, revision=0x2
microcode: CPU1 sig=0x20655, pf=0x2, revision=0x2
microcode: Microcode Update Driver: v2.00 , Peter Oruba
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1414479306.432:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 15563
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x32, linelength=5120, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90004e80000, using 5120k, total 5120k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x25
intel_idle: lapic_timer_reliable_states 0xffffffff
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PBTN]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
0000:00:16.3: ttyS4 at I/O 0x11a8 (irq = 17, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
tpm_tis 00:08: 1.2 TPM (device-id 0xB, rev-id 16)
tpm_tis 00:08: TPM is disabled/deactivated (0x7)
brd: module loaded
loop: module loaded
ata_piix 0000:00:1f.2: version 2.13
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi0 : ata_piix
scsi1 : ata_piix
ata1: SATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x1150 irq 14
ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x1158 irq 15
ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
tsc: Refined TSC clocksource calibration: 2793.314 MHz
scsi2 : ata_piix
scsi3 : ata_piix
ata3: SATA max UDMA/133 cmd 0x11c0 ctl 0x11e0 bmdma 0x1170 irq 18
ata4: SATA max UDMA/133 cmd 0x11c8 ctl 0x11e4 bmdma 0x1178 irq 18
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 20, io mem 0xf0426000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 20, io mem 0xf0426400
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.13.0-37-generic ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:02: RTC can wake from S4
rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 2cb1133b35f95a9e24deabeeb12ba449bcbabbc9'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
tpm_tis 00:08: A TPM error (7) occurred attempting to read a pcr value
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 2:654:924
rtc_cmos 00:02: setting system clock to 2014-10-28 06:55:08 UTC (1414479308)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
ata3: SATA link down (SStatus 0 SControl 310)
ata4: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 1-1: New USB device found, idVendor=8087, idProduct=0020
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.01: SATA link down (SStatus 0 SControl 300)
ata2.01: link offline, clearing class 3 to NONE
ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.01: SATA link down (SStatus 0 SControl 300)
ata2.00: ATAPI: hp DVD RW AD-7251H5, 1H8D, max UDMA/100
ata1.00: ATA-8: ST3250312AS, HP63, max UDMA/100
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata2.00: configured for UDMA/100
ata1.00: configured for UDMA/100
scsi 0:0:0:0: Direct-Access ATA ST3250312AS HP63 PQ: 0 ANSI: 5
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
scsi 1:0:0:0: CD-ROM hp DVD RW AD-7251H5 1H8D PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 1:0:0:0: Attached scsi CD-ROM sr0
sr 1:0:0:0: Attached scsi generic sg1 type 5
sda: sda1 sda2 < sda5 >
sd 0:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel memory: 1336K (ffffffff81d20000 - ffffffff81e6e000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 804K (ffff880001737000 - ffff880001800000)
Freeing unused kernel memory: 692K (ffff880001b53000 - ffff880001c00000)
systemd-udevd[118]: starting version 204
usb 2-1: New USB device found, idVendor=8087, idProduct=0020
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 78:e3:b5:a0:5d:06
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 9, PBA No: A002FF-0FF
usb 2-1.5: new low-speed USB device number 3 using ehci-pci
Switched to clocksource tsc
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
usb 2-1.5: New USB device found, idVendor=03f0, idProduct=0024
usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.5: Product: HP Basic USB Keyboard
usb 2-1.5: Manufacturer: CHICONY
usb 2-1.6: new low-speed USB device number 4 using ehci-pci
usb 2-1.6: New USB device found, idVendor=046d, idProduct=c077
usb 2-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-1.6: Product: USB Optical Mouse
usb 2-1.6: Manufacturer: Logitech
random: init urandom read with 96 bits of entropy available
random: nonblocking pool is initialized
Adding 8181756k swap on /dev/sda5. Priority:-1 extents:1 across:8181756k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[282]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
mei_me 0000:00:16.0: irq 41 for MSI/MSI-X
wmi: Mapper loaded
[drm] Initialized drm 1.1.0 20060810
[drm] Memory usable by graphics device = 2048M
checking generic (e0000000 500000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
Console: switching to colour dummy device 80x25
------------[ cut here ]------------
WARNING: CPU: 0 PID: 308 at /build/buildd/linux-3.13.0/drivers/gpu/drm/i915/intel_opregion.c:266 swsci+0x2ec/0x300 [i915]()
excessive driver sleep timeout (DSPL) 4285529939
Modules linked in: snd i915(+) tpm_infineon drm_kms_helper drm mei_me wmi video mei i2c_algo_bit parport_pc soundcore ppdev mac_hid lp parport psmouse e1000e ptp pps_core
CPU: 0 PID: 308 Comm: systemd-udevd Not tainted 3.13.0-37-generic #64-Ubuntu
Hardware name: Hewlett-Packard HP Compaq 8100 Elite SFF PC/304Ah, BIOS 786H1 v01.05 06/09/2010
0000000000000009 ffff8800d2c8f810 ffffffff8171ed09 ffff8800d2c8f858
ffff8800d2c8f848 ffffffff8106773d ffffc90004e60640 ffff88020eea5800
00000000000001f4 0000000000000008 ffff8800d2c8f920 ffff8800d2c8f8a8
Call Trace:
[] dump_stack+0x45/0x56
[] warn_slowpath_common+0x7d/0xa0
[] warn_slowpath_fmt+0x4c/0x50
[] swsci+0x2ec/0x300 [i915]
[] intel_opregion_setup+0x204/0x3f0 [i915]
[] i915_driver_load+0x58d/0xe70 [i915]
[] drm_dev_register+0xa2/0x1e0 [drm]
[] drm_get_pci_dev+0x92/0x140 [drm]
[] i915_pci_probe+0x3c/0x90 [i915]
[] local_pci_probe+0x45/0xa0
[] ? pci_match_device+0xc5/0xd0
[] pci_device_probe+0xd9/0x130
[] driver_probe_device+0x12d/0x3e0
[] __driver_attach+0x93/0xa0
[] ? __device_attach+0x40/0x40
[] bus_for_each_dev+0x63/0xa0
[] driver_attach+0x1e/0x20
[] bus_add_driver+0x180/0x250
[] ? 0xffffffffa01f6fff
[] driver_register+0x64/0xf0
[] ? 0xffffffffa01f6fff
[] __pci_register_driver+0x4c/0x50
[] drm_pci_init+0x11a/0x130 [drm]
[] ? 0xffffffffa01f6fff
[] i915_init+0x6a/0x6c [i915]
[] do_one_initcall+0xfa/0x1b0
[] ? set_memory_nx+0x43/0x50
[] load_module+0x12dd/0x1b40
[] ? store_uevent+0x40/0x40
[] SyS_finit_module+0x86/0xb0
[] system_call_fastpath+0x1a/0x1f
---[ end trace a0a2041ef0ed1624 ]---
i915 0000:00:02.0: irq 42 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
fbcon: inteldrmfb (fb0) is primary device
WARNING! power/level is deprecated; use power/control instead
hidraw: raw HID events driver (C) Jiri Kosina
kvm: disabled by bios
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
type=1400 audit(1414479317.819:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=342 comm="apparmor_parser"
type=1400 audit(1414479317.819:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=342 comm="apparmor_parser"
type=1400 audit(1414479317.819:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=342 comm="apparmor_parser"
type=1400 audit(1414479317.819:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=342 comm="apparmor_parser"
type=1400 audit(1414479317.819:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=342 comm="apparmor_parser"
type=1400 audit(1414479317.819:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=342 comm="apparmor_parser"
Console: switching to colour frame buffer device 160x64
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
i915 0000:00:02.0: registered panic notifier
ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20131115/video-1278)
ACPI: Video Device [GFX0] (multi-head: no rom: yes post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
snd_hda_intel 0000:00:1b.0: irq 43 for MSI/MSI-X
SKU: Nid=0x1d sku_cfg=0x40028201
SKU: port_connectivity=0x1
SKU: enable_pcbeep=0x0
SKU: check_sum=0x00000002
SKU: customization=0x00000082
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
speaker_outs=1 (0x15/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
inputs:
Mic=0x19
Line=0x18
realtek: No valid SSID, checking pincfg 0x40028201 for NID 0x1d
realtek: Enabling init ASM_ID=0x8201 CODEC_ID=10ec0662
input: CHICONY HP Basic USB Keyboard as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input7
hid-generic 0003:03F0:0024.0001: input,hidraw0: USB HID v1.10 Keyboard [CHICONY HP Basic USB Keyboard] on usb-0000:00:1d.0-1.5/input0
input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input8
hid-generic 0003:046D:C077.0002: input,hidraw1: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.0-1.6/input0
gpio_ich: GPIO from 180 to 255 on gpio_ich
input: HDA Intel MID HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel MID Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel MID Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel MID Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HP WMI hotkeys as /devices/virtual/input/input6
EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
init: failsafe main process (599) killed by TERM signal
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1414479321.847:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=723 comm="apparmor_parser"
type=1400 audit(1414479321.847:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=723 comm="apparmor_parser"
type=1400 audit(1414479321.847:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=723 comm="apparmor_parser"
type=1400 audit(1414479321.907:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=742 comm="apparmor_parser"
init: cups main process (724) killed by HUP signal
init: cups main process ended, respawning
e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
e1000e 0000:00:19.0: irq 40 for MSI/MSI-X
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
init: plymouth-upstart-bridge main process ended, respawning
init: plymouth-upstart-bridge main process ended, respawning
e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: None
e1000e 0000:00:19.0 eth0: 10/100 speed: disabling TSO
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
audit_printk_skb: 150 callbacks suppressed
type=1400 audit(1414479352.908:62): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=1559 comm="apparmor_parser"
type=1400 audit(1414479352.908:63): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1559 comm="apparmor_parser"
type=1400 audit(1414479352.908:64): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=1559 comm="apparmor_parser"
type=1400 audit(1414481323.133:65): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2455 comm="apparmor_parser"
type=1400 audit(1414481323.133:66): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2455 comm="apparmor_parser"
type=1400 audit(1414481323.133:67): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2455 comm="apparmor_parser"
systemd-hostnamed[4204]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
perf samples too long (2512 > 2500), lowering kernel.perf_event_max_sample_rate to 50000